Watertec Engineering Pty Ltd
Ozone and UV Specialists
We Provide The Solution To All your Water Treatment Requirements"
Water Chiller - C Series
The C-Series water chillers are designed to cool the ozonator cooling water and are typically used in applications where limited cold (<20oC) fresh water is available for cooling. Because water chillers generate heat it is advised that they be installed in a well ventilated area, outside the ozone generation room, and undercover (if possible) for maximum air circulation. Refer to installation manual or call for advice.
Before sizing chiller, refer to Watertec Office on pressure drop if chiller is to be installed more than 5m from the ozonator.
Standard C-Series Unit includes a set of powder-coated panels, hermetically sealed compressor, Copper tube evaporator, Copper Tank insulated with 25mm polystyrene, Copper tube/aluminium fin air cooled condenser, thermostatic expansion valve, digital thermostat, crankcase pressure regulating valve and multistage pump. All mounted on a galvanised steel frame.
Standard Power 240V 50 HZ (*) or 415V 50 HZ
Water Chiller - R Series
The R-Series water chillers are our newest range of water chillers.
Before sizing chillers refer to Watertec Office on pressure drop if chiller is to be installed more than 5m from ozonator.
Standard R-Series Unit includes a set of powder-coated panels, hermetically sealed reciprocating compressor with thermal overload, Copper tube evaporator, plastic moulded tank integrally insulated with expanded polyurethane for strength and thermal insulation, stainless steel pump. All mounted in a single self contained unit.
Standard Power 240V 50 HZ (*) or 415V 50 HZ.